Suzuki Forums banner

How to reset 2019 ignis tyre pressure warning light

48K views 16 replies 9 participants last post by  Jessindbz  
#1 · (Edited by Moderator)
Any suggestions? No manual with the car.
 
#2 ·
and its a 2019? and has no manual? I'd go and complain to the dealer you got it from and get them to reset it for free
 
#9 ·
This has been covered previously. Over-inflate the tyres by 10% then drive the car until the alarm cancels (25+ mph for 10 minutes). Check the tyre pressures on the display and cross check with the pressures recorded on your gauge. Ensure that the readings are within about 1psi of each other on each tyre. After leaving the car to stand for a couple of hours - adjust the tyre pressures to the recommended settings. If the problem re-appears - check that the offending tyre isn't actually loosing pressure and that the alarm is genuine.