Suzuki Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Help or advice on wiring my car with a push button and toggle switck as on n off switch. Its only run on a racetrack
 

·
Super Moderator
Joined
·
12,258 Posts
Find the ignition switch harness and separate out the different connections, there will be a12V power supply, an ACC feed, one or more IGN feeds, and a START feed - the 12V power goes to one side of the toggle switch, the IGN & ACC feeds connect to the other side, the START feed goes to one side of the push button and the other side goes to the IGN & ACC side of the toggle switch.
 
1 - 2 of 2 Posts
Top