Suzuki Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a suzuki carry with no tacho/rev gauge so baught a cheap one from ebay. Attempting to install and insure how to connect.

I have G13B with 2 coil packs over spark plugs. Was thinking to hook it to the trigger wire from the ECU to the coil pack (see diagram). However I read this is a 5v signal and goes LOW when spark triggered (so normally high).

Anyone have any ideas?

Thanks
 
1 - 1 of 1 Posts
Top