Suzuki Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Alright, so I am working on a 2009 sx4, the belt was having some issues, I changed the belt and idler pulley(seized up) about a month ago, working on the car again today for a very similar issue, so n I take the belt off that has been shredded, and the tensioner pulley was grinding a bit, changed it, put a new belt on, started the car, and the belt keeps popping off a tooth on the water pump pulley, I checked all the pulleys again and found that the power steering pump has some play. Is there anyway to tighten this pulley? Or is it pressed on? Any and all help is very much appreciated!
 
1 - 3 of 3 Posts
Top