[aquanaut20]

Important to first repair the CEL so that you can record any codes.. If it runs on remote fuel then all that is missing is fuel..
No noid light would indicate either a damaged wire of a faulty ECM..

For interest sake are you Multi port or TB injected ??

 

[aquanaut20]

Yes the NOID light should pulse when cranking
If you have the jumper in, the CEL should show a code if there is an error, so if the CEL does not illuminate, chase that first..

 

[aquanaut20]

You need to confirm injector signal at the FI connector (noid light)