Suzuki Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,098 Posts
hi welcome to the forum. i think i have the specs but i cant get them till tomorrow. ill post when i get them for you.
 

·
Registered
Joined
·
3,098 Posts
hey sorry it took a bit to get back to you. doing some hurricane prep over hear on the east coast.. so this is what the manual says.
tighten the head bolts to 25 Nm (18 lb-ft)
and turn the bolts another three turns of 90 degrees using the angular torque gauge
the tightening sequence is this.
bottom left, top left
top right, bottom right
bottom left second from end, top left second from end
top right second from end, bottom right second from end
bottom middle, top middle
2 6 10 7 3
1 5 9 8 4
anything else just ask
 
1 - 3 of 3 Posts
Top