Suzuki Forums banner

1 - 20 of 20 Posts

·
Registered
Joined
·
3,805 Posts
Discussion Starter #1
I need pictures of where the projectors mount to the frame...also if you can take pictures with the projector out of all the connecting points (theres one on the left and right, one looks like it might be a bold the other just kinda sit inside a thingy).

Turns out there are more differences between the reno and forenza than we think...I dont think it'll be easy for me to make the projectors work.

Danny
 

·
Registered
Joined
·
2,069 Posts
Zipper said:
We should be seeing a reno or two this weekend. Wound be a problem if some one volonteered their reno
:p



Kinky I see about taking some pictures later tonight. I don't know if I can remove the headlight assembly or not, but I will see about getting the housing of the headlight and where it is attach and what have you.
 

·
Registered
Joined
·
2,069 Posts

·
Registered
Joined
·
3,805 Posts
Discussion Starter #7
jurupa said:
Here are some pictures Kinky:

http://img.photobucket.com/albums/v366/jurupa/Picture001.jpg (top of the headlight)
http://img.photobucket.com/albums/v366/jurupa/Picture002.jpg (back of headlight)
http://img.photobucket.com/albums/v366/jurupa/Picture003.jpg (Another picture of the back)

I would have tried to get more, but my camera was almost dead. I am charging it now, so if you need more I should be able to take some tomorrow.
Thanks! when you get a chance (no hurry) can you take a picture of the top/front?
 

·
Registered
Joined
·
2,069 Posts
kinkyllama said:
Thanks! when you get a chance (no hurry) can you take a picture of the top/front?
Top/front from the front of the car I assume? And do you want both head lights or just one? Do want one from the side as well?
 

·
Registered
Joined
·
2,069 Posts
Zipper said:
We'll do areal good job Saturday. Make alist. We'll have both my camera, and my camcorder.
WE'RE GOING TO MAKE MOVIE!!!!!!!


lol


I am just playing. But ya I am sure you can most probably do a better job of taking pictures than me Zip.
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #11
jurupa said:
Top/front from the front of the car I assume? And do you want both head lights or just one? Do want one from the side as well?
Top/front of the headlight...like try to show the front of the headlight (like th eprojector peice) and the top mounting points...and at least alittle bit around the sides of them.

Danny
 

·
Registered
Joined
·
2,069 Posts

·
Registered
Joined
·
3,805 Posts
Discussion Starter #14
jurupa said:
Here you go.


http://img.photobucket.com/albums/v366/jurupa/Picture005.jpg (hood open)

http://img.photobucket.com/albums/v366/jurupa/Picture004.jpg (hood closed)

I took these at midnight so I couldn't back up my car to take better pics. I did the one with the hood closed so you have a better sense of the front of the Reno looks like with the projectors and all.

Zipper may take some more pictures for you tomorrow, I don't know.
Perfect thankyou...I really dont need more but it wouldnt hurt.

Danny
 

·
Registered
Joined
·
2,069 Posts
Zipper said:
Zipper is also woundering why your up this late also. Iwaswatching Robot Chicken on you tube, whats your exscuse
Uh lets see, I am an admin at another forum and was doing my nightly check on the forum. I also been working on a site for a sports paper (its basically local btw and has not launch yet). And I was semi partying as I finally got a job, and it is at that theater I mention in the Street forum section. When I had the run in with the Ferrari. So me going to rich area and interacting with rich people.:D


kinkyllama said:
Perfect thankyou...I really dont need more but it wouldnt hurt.

Danny
Your welcome. I didn't think the one with the hood closed wouldn't hurt.
 

·
Registered
Joined
·
291 Posts
I'll take some pics of the mounts and other stuff. Some guy pulled out in front of me and i hit him, So when i pull the light i will post the pics.



kinkyllama said:
I need pictures of where the projectors mount to the frame...also if you can take pictures with the projector out of all the connecting points (theres one on the left and right, one looks like it might be a bold the other just kinda sit inside a thingy).

Turns out there are more differences between the reno and forenza than we think...I dont think it'll be easy for me to make the projectors work.

Danny
 

·
Registered
Joined
·
2,069 Posts
kinkyllama said:
Now I need pictures of where the hood latchs to the chassis and the hoods latch on the hood part.

Along with maybe just a buncha random pictures of that area of the chassis in front there.

The reno hood either latchs much lower or is much lower towards the front part
Basically front middle bumper area? I will be able to take some pictures most probably tomorrow.
 

·
Registered
Joined
·
2,069 Posts
Hopefully these help Kinky:


http://img.photobucket.com/albums/v366/jurupa/Picture011.jpg - the hood latch. It is a tad bit to the right of the "S" and yes I know the pic basically sucks:p

http://img.photobucket.com/albums/v366/jurupa/Picture006.jpg - This is where the hood latch goes to the frame of the car. The hook part goes into the retangle and the thing next to it goes in the circle one.

http://img.photobucket.com/albums/v366/jurupa/Picture008.jpg - Another shot of the latch front bumper area from the left side of the car.

http://img.photobucket.com/albums/v366/jurupa/Picture009.jpg - A far away shot of the latch area. The other car in the pic is my moms car, its a Toyota Camry.

http://img.photobucket.com/albums/v366/jurupa/Picture007.jpg - Now the right side of the latch.

http://img.photobucket.com/albums/v366/jurupa/Picture010.jpg - And the far shot for the right side of the latch, with a side door of my garuage lol.

And yes that black thing in the engine bay is the BMS CAI.:)
 
1 - 20 of 20 Posts
Top