Suzuki Forums banner

1 - 20 of 59 Posts

·
Registered
Joined
·
3,805 Posts
Discussion Starter #1 (Edited)
kinkymotorsports.com, Be different!

We're still not done but I thought I'd post it so I don't have to spend 30mins a day answering "What performance parts do you have available?". If you see any problems with links not working for the parts themselfs let me know. Most of the links for all the other stuff don't work, allot of pictures aren't there, some pics are in the wrong spots, and some of the fonts/descriptions aren't organized.

Enjoy! and don't forget to check out GSE turbos store: www.daftart.com

Parts to look forward to within 6 months:
-White speedo gauges (~2 months)
-Different colored bulbs (probably LEDs) to put behind the white speedo gauges (~2 months)
-Forenza/reno CAT-back exhaust (~1 month)
-Front Strut brace
-Mid under chassis brace
-"Shorty" turbo manifolds and downpipes (~2 months)
-Full or partial turbo kits
-Ground wiring kits
-Lacetti door sills and Lacetti rear badges (badges available now) (~2weeks)
-KDM lip kits for Forenza and Reno (~2 weeks)
-KDM reno spoiler, should work for the forenza too (~2 weeks)
-Turbo--wastegate (~2 weeks)
-Turbo--BOV (~2 weeks)
-Innovate wideband o2 sensor (~2 weeks)

Let me know if your intrested in the Lacetti door sills, Lacetti badges, KDM spoiler, and KDM lip kits. If anyone's intrested in just the rear lip for the Reno, or just the front & rear let me know. I want side skirts, and am unsure if I want the front but I have to purchase the full kit, you'll get the other peice(s) at cost.

Pictures:

Lacetti door sills:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806223-lacetti_sills.jpg

Forenza KDM lip kit:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806055-_forenza_bodykit.jpg
http://i192.photobucket.com/albums/z80/Kinkymotorsports/06forenza-oembodykit4.jpg

Reno KDM lip kit:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806067-_Reno_bodykit.jpg
http://i192.photobucket.com/albums/z80/Kinkymotorsports/05reno-oemkit4.jpg

KDM reno spoiler (pretty neat):
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806043-reno_spoiler.jpg
 

·
Registered
Joined
·
2,069 Posts
Kinky you have a deal on header and turbo manifolds? lol


It looks good and is bookedmark along with GSE Trubo site.
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #7
Parts to look forward to within 6 months:
-White speedo gauges (~2 months)
-Different colored bulbs (probably LEDs) to put behind the white speedo gauges (~2 months)
-Forenza/reno CAT-back exhaust (~1 month)
-Front Strut brace
-Mid under chassis brace
-"Shorty" turbo manifolds and downpipes (~2 months)
-Full or partial turbo kits
-Ground wiring kits
-Lacetti door sills and Lacetti rear badges (badges available now) (~2weeks)
-KDM lip kits for Forenza and Reno (~2 weeks)
-KDM reno spoiler, should work for the forenza too (~2 weeks)

Let me know if your intrested in the Lacetti door sills, Lacetti badges, KDM spoiler, and KDM lip kits. If anyone's intrested in just the rear lip for the Reno, or just the front & rear let me know. I want side skirts, and am unsure if I want the front but I have to purchase the full kit, you'll get the other peice(s) at cost.

Pictures:

Lacetti door sills:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806223-lacetti_sills.jpg

Forenza KDM lip kit:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806055-_forenza_bodykit.jpg
http://i192.photobucket.com/albums/z80/Kinkymotorsports/06forenza-oembodykit4.jpg

Reno KDM lip kit:
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806067-_Reno_bodykit.jpg
http://i192.photobucket.com/albums/z80/Kinkymotorsports/05reno-oemkit4.jpg

KDM reno spoiler (pretty neat):
http://i192.photobucket.com/albums/z80/Kinkymotorsports/96806043-reno_spoiler.jpghttp://i192.photobucket.com/albums/z80/Kinkymotorsports/96806043-reno_spoiler.jpghttp://i192.photobucket.com/albums/z80/Kinkymotorsports/96806043-reno_spoiler.jpg
Edited orignal post to add "future projects". This is for the reno/forenza only, I left out other makes/models.
 

·
Registered
Joined
·
1,284 Posts
the reno spoiler looks kinda cool. idk if i'd buy it, though...i still want the evofusion one, but id rather have a stronger way to mount it(its held on the window by 3m tape)
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #9
the reno spoiler looks kinda cool. idk if i'd buy it, though...i still want the evofusion one, but id rather have a stronger way to mount it(its held on the window by 3m tape)
Yeah I love it, factory sport style to it.

For all I know that spoiler might be 3m tape as well though. I'd guess not just because it's a factory spoiler. Depending on how much my order comes out too I may order one for stock, otherwise there'd be a wait
 

·
Registered
Joined
·
176 Posts
wow, i love that lip kit and spoiler on the reno. PM or message me on myspace whenever it's availible kinky. since i'm already building up a honda motor, i've decided making my reno my daily-driver whip.

i just got my new rims in, 15x8. i'll make sure to get some pics and show you!

but yeah, PM me or message me on myspace when you do get all three availible to order!
 

·
Registered
Joined
·
232 Posts
When do you think the turbo kits will be out? Possible to get the ECU tuned to a safe 200whp and 200ft lb for an almost straight bolt on kit?
 

·
Registered
Joined
·
2,069 Posts
When do you think the turbo kits will be out? Possible to get the ECU tuned to a safe 200whp and 200ft lb for an almost straight bolt on kit?
The ECU as of now has not been hacked, and with how complex it is I doubt it will be hacked. Your best bet for a tuned ECU is to get an universal one and tune it.
 

·
Registered
Joined
·
232 Posts
Yes i agree with that. What I meant was could we not have an aftermarket ECU as part of the turbo kit that would be tuned so that each turbo kit sold would come with the ECU that would all be bolted on and such so that each kit had say 200hp. Of coarse a tuning would have to be done once installed on the car but it would make life so much easier as upposed to starting everything from scratch
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #14
wow, i love that lip kit and spoiler on the reno. PM or message me on myspace whenever it's availible kinky. since i'm already building up a honda motor, i've decided making my reno my daily-driver whip.

i just got my new rims in, 15x8. i'll make sure to get some pics and show you!

but yeah, PM me or message me on myspace when you do get all three availible to order!
Yeah they're amazing. Well if you want to be sure you get one you can put 50% down, I'm probably only getting two extras, maybe three. I know two people will buy one fairly soon after I get them.

Neato, what offset on the wheels? I just got 8" wide wheels stuffed under the fenders hardcore with 235mm tires. No more stock fenders though, I had them under the stock fenders but it wasn't slammed, just lowered


Yes i agree with that. What I meant was could we not have an aftermarket ECU as part of the turbo kit that would be tuned so that each turbo kit sold would come with the ECU that would all be bolted on and such so that each kit had say 200hp. Of coarse a tuning would have to be done once installed on the car but it would make life so much easier as upposed to starting everything from scratch
At this point I'm not getting into any details cause I haven't even thought about it, we may not even do one, but we're most likely going to do at least a partial kit which would include: Manifold, and downpipe...then optional turbo, BOV, and wastegate
 

·
Registered
Joined
·
176 Posts
Yeah they're amazing. Well if you want to be sure you get one you can put 50% down, I'm probably only getting two extras, maybe three. I know two people will buy one fairly soon after I get them.

Neato, what offset on the wheels? I just got 8" wide wheels stuffed under the fenders hardcore with 235mm tires. No more stock fenders though, I had them under the stock fenders but it wasn't slammed, just lowered
0mm FTW, i got really lucky finding somebody with these in stock. i'm looking to make some custom fender flares to go ahead and close the little bit that they're sticking out. for right now, i'm rocking the stretched look, just to show off the crazy staggered look, with a 195/50. i'll post pics in a thread right now actually!


and PM me with the price for everything i guess and i'll go ahead and try to get that 50% on its way to you!
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #16
0mm FTW, i got really lucky finding somebody with these in stock. i'm looking to make some custom fender flares to go ahead and close the little bit that they're sticking out. for right now, i'm rocking the stretched look, just to show off the crazy staggered look, with a 195/50. i'll post pics in a thread right now actually!


and PM me with the price for everything i guess and i'll go ahead and try to get that 50% on its way to you!
Wow...that's ~1.5" past the factory fenders. Since your only running 195mm tires that's probably not gonna be that hard.

When will this be done? I really wanna see pics.

I'll PM you when I figure out pricing
 

·
Registered
Joined
·
3,805 Posts
Discussion Starter #17
Some new products coming soon!

We're starting strut braces, mid-rear under chassis brace, and test pipes w/ lifetime warranty next week.

For the strut brace we're going to try to work it out so the brace bolts of course to the chassis around the strut area, but with an option of a peice to bolt it to the middle of the firewall as well. The plan would be that you can get the 2nd peice as an option when you buy the strut brace, or later on.

The cluster gauges shouldn't be a whole lot longer but I'm waiting on an update now.

If you missed it there's a group buy for carbon fibre 04 style forenza hoods and forenza trunk lids with reno hoods to follow hopefully shortly after but they need more intrest cause we don't have a spare hood for that.

Lastly, we're going to be starting "shorty" turbo manifolds soon. They preform much better than log styles with only a little more cost, but of course fall short from tubular turbo mani. We can build turbular turbo manifolds on request with a deposite though. Providing I fix a few mechanical issues with my car I should be getting the turbo on there soon.
 
1 - 20 of 59 Posts
Top