Suzuki Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10,881 Posts
Thank you Bex, I'll check that diagram out. I did find a video on YouTube that showed the bundled red, white, and blue wires on the back of the dash cluster go to a check engine reset switch. I did not have that plugged up, I'm curious if that caused it to burn the R221 check engine light diode.

Also, there seems to be a whole row of lights missing on the lower back section of the dash cluster is this normal (see photo).

View attachment 103695
Shine a torch thru each hole and see what symbol lights up, then you can work out if your vehicle needs that
 
  • Like
Reactions: LandShark

·
Registered
Joined
·
10,881 Posts
Cooked resistor and hot diode indicates a high current flow, something is faulty.....
 
1 - 2 of 2 Posts
Top