Suzuki Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter #1 (Edited)
Greetings all, well due to demands of work, I am selling my sidekick. So heres the deal, The engine ran good, the trans works good, the clutch is on its way out. The body is in very good condition, the most rust I saw was a slight tinge of the paint. the Rockers are solid. the doors are solid, over all the whole body is solid. the driver-side fender has a small golf ball sized dent just below the turn-signal.

There is on ECU in it, the PO arced a wrench on the intake manifold and fried the #1 injector circuit, I spec'd out all of the sensors and everything is fine with them. #1 injector is new, new cap and rotor wires, plugs are a little black from me trying to get it running. The oil plug gasket needs to be replaced, and the exhaust manifold to pipe gasket needs new. The timing belt is in tact, but I would suggest replacing it. The alternator on it is brand new, only turned by hand while timing the engine.

I have been in it, under it around it, and through it, checked all the common rust spots on the frame, and couldn't see anything that a bit if wire brushing and some paint couldn't fix.

I'd like to try selling as a whole first, after 1 week from time of post, I'll take requests for parts. small things I can ship if need be, but I would rather pick ups. If no interest up to April 30th, it will be going to the salvage yard. i will grab some pics of it later today, need to push it out of the garage into the sun.

before I forget, price.. due to the condition of the body, Id like to get 600 as a whole. I am considering offers, just shoot me a pm. If after the first week pm on what your looking for and Ill have a look and see if its good or not.

It has to go one way or another, id rather it goes to some one who can get it back to life.

Those who might want parts, I cannot pull the motor or trans, due to me lacking the tools to do it. i moved 1200 miles from my previous home and couldn't bring my tools. they are collecting dust in my brother garage. If you are interested in the motor and the like, you are more than welcome to come and pull it, its in a garage no heat but i can dream something up.

Cheers Sean
 

·
Registered
Joined
·
72 Posts
Discussion Starter #2 (Edited)
lots of Pics for you

The rear side and back windows have 5% tint on them, as does the top of the windshield.








The interior is in a bit of a mess, i was pullin out my sterio and other things, it will be back together after tomorrow. the White pole was for my laptop mount, it is not bolted to the floor, but to the existing seat mounts.





Dent on the front driver side





driver side tank mount

pass side tank mount
 

·
Registered
Joined
·
72 Posts
Discussion Starter #3
Driverside swing arm mount

Pass side swing arm mount

Driver side link mount

Pass side link mount

Exterior mirrors




Any questions PM me
 

·
Registered
Joined
·
300 Posts
Dude , I want that grill so bad, lol Great stuff...
 

·
Registered
Joined
·
72 Posts
Discussion Starter #5
Two more day left on as whole, then i will start taking orders on parting it out. If you want somthig shipped I'll need your zip, shipping cost are added to item cost. If you would like insurance on your shipping let me know also.

Cheers, Sean
 

·
Registered
Joined
·
72 Posts
Discussion Starter #6
Friday is here, now accepting requests for parts. Just post up in here if your looking for anything. small stuff I can ship, lets say to the continental U.S. If your outside the US we might be able to work something out, but it might not be worth it.
Larger items you are more than welcome to contact me to come and get. I cannot pull the motor/ trans, lack of tools, but doors, fenders, those I can have off if you want them.

If you would like Pics of anything you are looking for, if i have it ill take pics for you to look at.

Cheers, Sean
 
1 - 7 of 7 Posts
Top