Suzuki Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
So, I'm going to mount some CJ springs on the rear of my 86 TinTop wSPOA & move the Rears Up Front.
My question is; Since the CJs use a 3/8" bolt with the bushing & Sammy uses 1/2" (or metric equiv), Should I drill out a new set of CJ bushings from LowRange to 1/2"?
I'd appreciate any feedback, or shared experience w/ similar project.
Thanks in advance.

"It's that Jeep Thing I Just can't Understand" ;)
 
1 - 1 of 1 Posts
Top