Suzuki Forums banner

1 - 4 of 4 Posts

26 Posts
Discussion Starter #1
I have uprated to steel rods with wiseco pistons, thus my original setup is now for sale.
This setup lowers the compression ratio to about 8.8:1 - 9.0:1 (stock compression of C20LET), and is designed for turbocharged / supercharged applications. Safe limit of below combo is approx 350 hp at the crank
T20SED Daewoo Nubira
U20SED Suzuki Reno / Forenza, Chevy Optra
X20XEV Opel vectra / Calibra
This set will not work with the Leganza's 2.2 T22SED
New Mahle C20LET, stock compression, std size. With rings, pins and clips. Tops are ceramic coated, while skirts are molybdenum coated. Pistons are balanced to 440 grams each.
New rods, debeamed and polished. Big end and small ends were resized. Rods come with ARP ProWave 2000 bolts and ARP Moly. Rods were balanced to 677 grams each.
These pistons were retaining proper 2-3 tho clearance on my block with 75000miles after honing and 86.35bores.
All work was performed by local very reputable racing machine shop - copy of the invoice available upon request.
Ground shipping (up to 13 working days) with insurance/tracking is included. PR add $40 to shipping.
US $650
Price is somewhat negotiable, payment via PayPal.
This setup was ment for about 340-350hp at crank with proper management,
1 - 4 of 4 Posts