[Willo]

Replacing the exhaust pipe on my Samurai & hit a snag re the rubber pipe hangers.
The hangers resemble the attached pic, and the bolts passing through the holes use steel / iron sleeves, to take up the slack space between the bolts & the holes.
One of mine so far is badly rusted and another is frozen onto the bolt, where I had to cut the bolt off with a hacksaw.
Haven't been able to find replacements. Don't even know what they are properly called.
Looking at making do with sawn off 1/4" pipe nipples, but the actual parts would be nice.

 

[Willo]

Thanks!
The attached pic was one I found via a word search.
The ones I bought didn't have the sleeves.
I did pull one easily out of one of the old ones when I matched up (sorta) the 1/4" nipples.
Slightly larger diameter but should shove in & not very loose on the bolts.
Still, easier to get something off a shelf than to do the hacksaw work.