Suzuki Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter #1
Anybody done this? I've got a spare TC hanging around. Needs a rebuild and a set of lower gears. I've been looking at the Twisted TT conversion. I thought about filling and re-grinding the stock shifter rails. Worst that could happen is I'll have to buy the Twisted TT rails, if I screw up.
Anybody tried this? It looks like I need to relocate the detent ball slot and grind some new notches in the rails. Any dimensions for the shifter stalk slots out there?
Thanks.
 

·
Registered
Joined
·
686 Posts
I cant recall where but this has been tossed around before. I think I was reading where someone had a TT and made others from one as a template.

I bought and installed the TT and like it quite a bit. I would suggest that it is money well spent if you plan to spend much time off road. If you do make one please post the results.
 
1 - 2 of 2 Posts
Top