Suzuki Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
HI all,
During my 1.3 to 1.6 conversion on my 87 samurai – I miss placed the crankshaft position senor connector. From my research I cannot find anyone who makes/sells these.

My salvage yard had some Trackers but the wiring harness had been cut. They had no Sidekicks --- The Prizm does not have the same engine --- Then --- I found that the Geo metro 95 -98 used the same sensor.
So I can state with fact that a 1996 Geo Metro and a 1997 Geo Metro LSI have the same sensor and the same connector.

Hope this post helps someone out.

Dan Burkhardt
Phoenix, AZ
87 Suzuki Samurai ~ 1.6 - 16V
 
1 - 1 of 1 Posts
Top