[texastintop]

I'm sure a few of you guys with the early model Sami's have noticed the sides of the center of the steering wheel crack because of the casting line under the horn cover. Well I have a steering wheel that isnt visable cracked on the outside, but the inside part under the horn cover where the casting line is already starting to crack, I wanted to fill this with something hard to prevent the crack from spreading, anything you guys would recomend? I'm thinking epoxy, or super glue?

 

[whincup]

id be careful about what you did use. some glues will eat softer materials... dont know if that will be the case on the steering wheel, but id be trying a tiny bit on some small inconspicuous part first... but thats just me... dont see a epoxy being a problem though...