Suzuki Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
One of my low beams burned out after 5 yrs. I decided to replace all the bulbs while having everything apart, I went for PAA Bulbs. After putting everything back together I noticed the DRL's where off, but instead the high-beams were on though with reduced voltage.
I did put the original bulbs back. Same problem .
Anybody have the same issue or a remedy?
 

·
Registered
Joined
·
5 Posts
hmmm

I have a 2010 that is having an odd light issue (just posted), kind of similar. Did you get the issue resolved? If you did, what was the solution?
Best Karen
 

·
Registered
Joined
·
8,501 Posts
Suspect you have a grounding issue, current is bypassing via another element..

... Philip
 

·
Registered
Joined
·
2,100 Posts
After putting everything back together I noticed the DRL's where off, but instead the high-beams were on though with reduced voltage.
I did put the original bulbs back. Same problem .
Anybody have the same issue or a remedy?
Isn't that how they implemented the DRL's on the North American Kizashis? From what I've read they pulse width modulate the 12V fed to the high beam bulbs- so they operate at a lower intensity.

Check if you get normal operation with the headlights turned on to low and high beam.
 
1 - 4 of 4 Posts
Top