Suzuki Forums banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
19,067 Posts
Unbolting the hinge from the frame requires the fender to be removed, unbolting the hinge from the door is easier - be warned, even if the frame/jamb is undamaged, this is not a simple repair, you're going to need a minimum of two people to just remove & replace the door, and you can expect to spend quite a bit of time adjusting it, I suggest you remove the latch from the jamb whilst initially installing the door, and a floor jack and a timber 2x4 under the door to support it whilst adjusting the hinges.
 
1 - 1 of 1 Posts
Top