I've heard of a few people doing it with great success, but I don't them personally. I had been seriously considering a 3.8 tbird v6 and 4 sp auto trans, but its a 93 and the 87 sammy is already a smogger. Cailf. frowns on smoggers. I haven't looked up the specs for an xl motor. Is it an all aluminum unit, block and all? Fairly light weight? The early bird v6 is basically a cut down v8. A cast iron block makes it very heavy; another reason to reconsider my swap. I'll talk to others for any info on your swap. If your good with a heat wrench any swap is possible!
game on citizendan
Just like the title. Turned and wouldn’t start. Squirt fuel in Carb at it ran but only with squirts. Took line off to carb and no fuel pumped. Went to filter and changed because it was blocked. Turned over and fuel pissing out line before carb. Did line up to carb and turned over. Wouldn’t...
I purchased an 87 Samurai that someone installed an electric fuel pump on. I want to to change it back to an original mechanical fuel pump. What correct hose routing? It does have a Weber Carb and no emission junk on it.
Any help would be appreciated.
Hi, I was hoping someone can help me with determining where the diverter valve vacuum lines come from.
This pic is from the internet, my jimny had the diverter valve removed and all the hoses plugged. So, if you
look between the intercooler and the air box, you will see the diverter valve and...
Can anyone tell me how to remove the pins (2 upper, 1 lower) that holds the plastic corner trim to the steel bumper? Also, does anyone have the specs for the 2 screws holding the same plastic trim to the end of the bumper? I had to destroy the screws to get them off the bumper. I assume they...