Suzuki Forums banner
sensor
1-7 of 7 Results
  1. General Suzuki Non-Model Specific Discussion
    The sensor will be used in outboard motors of a high speed vessel in the Galapagos Islands. The main goal is to do sea trials and take torque measurements during a 2-hour sailing trip on three outboard motors, for this, three sensors will be needed. The power of each motor is approximately 350Hp...
  2. Suzuki SX4 Forum
    Hi guys, I just would like to find a solution if possible with you if you know it: Engine light is on, along with (ABS) light as well, If am driving to the car the dashboard light is going and the (steering yellow sign-lock up) is showing and in this time you could not twist the steering left...
  3. 3G (2006-2014) Vitara & Grand Vitara
    Need some help. Got a Check engine light on, code P0140 what could it be causing it? I cleared the code last week because google said its a generic obd2 code for oxygen sensor and that it could be random. So i cleared it but its back so something up, just dont know what. I dont want to start...
  4. Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    I had a mechanic look at my 1991 Sidekick, because it was surging on warm idle. He figured out that it was either the thermal sensor or the MAP sensor. I have the thermal sensor on order, but the MAP sensor was really expensive. The cheapest price I found was 445.00 CAD, because it has to be...
  5. 2014+ S-Cross
    I've had my S-Cross for nearly 4 years now with no issues, but in the last few days when I put it into reverse the sensors go off immediately as if there is something close behind (even when there isn't). There's nothing stuck to the bumper or underneath, and it's never been hit that I know of...
  6. Suzuki Esteem & Baleno Forum
    Hi im new here so i might have missed this somewhere in the endless forum pages :) I've been having this problem since I got my Suzuki Baleno 2017, that no matter how bright it is outside, when I drive under a bridge for like.. 0.5 sec.. my headlights turn on. I looked in the owners manual and...
  7. 2G (2007+) XL7
    Hello, I am wondering what is the easiest way to replace the crankshaft positioning sensor? It’s in the back left, bottom of the engine and it’s in the tightest spot ever. Should I remove the exhaust manifold or the transfer case? It’s misfiring and running rough. Thanks
1-7 of 7 Results
Top