Suzuki Forums banner

engine

  1. Suzuki Ignis Forum
    Hi! I’m brazilian and it’s very difficult to find parts for the car around here. Some people told me it’s the same engine as Jimny and Swift. I need to buy some parts, like valve tapp, toothed belt and other things like it. It will be really helpful if someone here knows if this parts from jimny...
  2. Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    Hello everyone, i have searched and read in the forums. I am sorry as english is not my first language, it´s difficult to find answers to some things as i cannot describe them correct. I have a X-90 1996 ID:JSAELB11S00102039 Car has been driven for a year, full service oil and filters also...
  3. Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    I was checking my engine bay and i found out this hise was leaking, the problem is i dont know what hose it is so i cant get a replacement
  4. 2004+ Swift
    G'day. I have a 2007 Suzuki Swift. It has done approximately 260,000 KM's so far. I have compression tested all cylinders and they all 100 psi. Some people are telling me Thy should be at least around 150 psi. Should I be worried? What could be the cause of compression psi loss? Even though...
  5. Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    Hello, My H20A engine in my Vitara sounds abit rough, like the valves are knocking. Is it a big job to adjust the valves? And what kind of adjustments is under the valve cover? Does anyone have a manual for the Suzuki Vitara V6 1995 and could be so kind and email me it? Thanks! Dani
  6. 1G (2001-2006) XL-7
    Hi Guys, Have any of you experienced that when your vehicle is running on idle, RPM is stable at around 800-1000. Then, when you turn on the air-contioning unit, the RPM drops to around 600-800 only. I'm passed checking & ensuring the usual regular change oil, tune up, fuses, batteries, etc. No...
  7. Suzuki Swift and Geo Metro Forum
    So considering the fuel price of E10 is cheap in Australia where I am, I am considering buying an old worn out M15A engine and rebuild it to suit Ethanol type fuels as a home project. Has this been done before? Is this possible? Or can these engines already handle E10?
Top