Suzuki Forums banner

Samurai vsv idle up differences

1K views 0 replies 1 participant last post by  jbwilli 
#1 ·
I am adding A/C to my 1990 1.3L TBI (no carb) Samurai. I have the SUZUKI Installation Manual and it shows a VSV with 2 vacuum lines, a 2 wire electrical connector AND an air flow adjustment screw. I cannot find one like this anywhere on line. I do have a Suzuki VSV, but it does NOT have the adjustment screw. Does anyone have any information on a VSV with the adjusting screw. Where to locate one? The only pn I have is Suzuki pn 95161 80C50. No pic and it does not state Carb vs TBI?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top