04-24-2018, 11:47 PM
Join Date: Jul 2017
Location: Tehachapi California
I have inquired with two separate sellers on Alibaba and gave up on that idea.
I will be putting together my own most likely using 3/32" hot rolled steel and 1/4" plate, that should stand up to anything I plan to do with the Tracker.
The cost of shipping was in the US $250 - $300 range and the prices were $350 - $450 for the bumpers.
There were no specs on what gauge steel the bumpers were made from but my guess is they are from 14 - 16 gauge if even that.
I think the inflated shipping cost on these items is one of those games to make one think the product weighs more than it actually does.
Though it is difficult to know for sure they appear to be simply made of light sheet metal stamped and pressed and not cut, bent and welded.
I would avoid them.
Try a local welding shop and talk to them about making one out of whatever size tubing you fancy, steel plate can then be added.
I'm here in the USA.
1994 Geo Tracker 1.6L 8V TBI, 3-spd auto 4WD 152K timing belt/wp power windows Camo seat covers carpet Dashcam & backup cam
1999 Chevy Tracker removable hardtop 1.6L 16 valve 5-speed 4WD 104K timing belt/wp aluminum radiator electric fan Bartact seat covers Vixen airhorn onboard compressor Dashcam rear locker winch
2002 Grand Vitara 2.5L 4WD 123K Valves lifters rings/bearings timing chain gears tensioners WP coils ECU
1991 GMC K2500 4WD 454 Xcab
1997 Trans Am LT1 auto