06-24-2017, 02:37 AM
Join Date: Jun 2017
09 jimny Auto to manual conversion help needed
i have an 09 jimny that was auto (the box failed) so i have installed a manual box
just need help to sorting wiring and other issues caused by swap has anyone done this before
engine light on
can't select 4L
i have a the auto wiring in the car and just have been unplug and are hang down ......the ECU is the auto one
park nuteral wiring has been bridge so car starts = Y/BKL and R/BKL
and i have the reverse wiring sorted as well = RED and YELLOW/BKL
i have aslo pull the auto trans fuse out the fuse box .......
what other wiring do i need to fix so that engine light will go out and
so that i can select 4L ......
have all notice that the engine is running a bit rougher than normal