10-28-2012, 04:19 PM
Join Date: Feb 2007
hey sorry it took a bit to get back to you. doing some hurricane prep over hear on the east coast.. so this is what the manual says.
tighten the head bolts to 25 Nm (18 lb-ft)
and turn the bolts another three turns of 90 degrees using the angular torque gauge
the tightening sequence is this.
bottom left, top left
top right, bottom right
bottom left second from end, top left second from end
top right second from end, bottom right second from end
bottom middle, top middle
2 6 10 7 3
1 5 9 8 4
anything else just ask