06-14-2007, 10:22 PM
Join Date: Nov 2005
Sounds like your heading to the dealer
Division: Automotive Section Title: Transmission
SUBJECT: IGNITION KEY WILL NOT COME OUT OF IGNITION SWITCH
MODEL(S): FORENZA SEDAN/WAGON, RENO (RQ420)
CONDITION: Assembly (28610-85Z00) if the park switch has come out of its designated location.
When attempting to remove the ignition key from the ignition switch tumbler, the
key will not turn to return the ignition switch to the locked position to allow key
The park switch in the gear selector control lever may have a broken anchoring
tab causing the switch contact to stay open. This open circuit prevents the ignition
tumbler solenoid from allowing the tumbler to rotate to the locked position to allow
for ignition key removal.
Inspect the park position switch located in the selector control lever assembly for
looseness. See instructions below. Replace the Selector Lever Solenoid