I have recently swapped the engine of my (Alto LEPO 2000 MT) from F6A to K6A, n the problem
am facing now is that the air conditioner is not working from the day it was swapped. i have gone through every possible section finding out what exactly the issue is, and finally i have come to a conclusion that (The signal wire for turning on the AC unit is missing from PIN OUT section of ECU BOX)
Its looks to be so easy but its not to find out the exact wire coming out of the ECU BOX.
Guys i would be really thankful if any one of you to come forward n help me out to fix this problem
some important points to elaborate further are:
>Signal from AC switch to ECU BOX is fine, but after ECU BOX its missing
> ECU box recognises that the AC is turned ON, but its not actually cause the power signal is not delivered properly.
Help me Out guys...........