Suzuki Forums banner

Search results

1-8 of 8 Results
Advanced Search
  1. 1998 Suzuki Sidekick Sport 4X4

    Classifieds - For Sale / Trade
    NO LONGER FOR SALE. FIXED. Gave it to my son.
  2. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    After a long wait for the clutch fork rod to come from Japan, I installed a new clutch kit, clutch rod and transmission bearing retainer, my son and I repaired the Suzuki. It now runs and drives and I gave it to my son. I told him that if it breaks down again I will not fix it. He agreed.
  3. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    I already replaced the bearing retainer and have a new clutch kit ready to install. I'll look at some Suzuki parts place for the shaft. Checked every Suzuki site I could find and they say this part is is no longer available. Looks like megazip.net in Japan is the only place that has it!
  4. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    Finally got around and took the Suzuki apart. Found that the clutch release shaft was broke where it held the throw out bearing. Also found that the throw out bearing was stuck in a groove on the Input Shaft Bearing Retainer, found the bearing retainer on ebay. Looking for the shaft and found...
  5. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    I decided not to fix the issue and sell it like it is. It's time to move on to another vehicle.
  6. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    Peddle goes to the floor and stays there.
  7. New from Catawba, Nc

    New Member Area/Introduction
    Hi, I'm from Catawba, NC and own a 1998 Suzuki Sidekick Sport 4X4. I have owned it for 16 years. Hope to get some good info on a problem I'm having.
  8. Clutch Line Part

    Sidekick/Escudo/Vitara/ Geo/X-90 &Tracker(’89-’98)
    Hi, I'm not new to a Suzuki but new to this site. I have a 98 Suzuki Sidekick Sport 4X4 with the 1.8l that I have owned for 16 years. I have replaced the clutch master cylinder and slave cylinder and cannot get it to hold pressure. I have pressure bleed from the top and reversed bleed from the...
1-8 of 8 Results
Top