You need to service from the bottom if memory serves. If you have the old belt still on there just draw it out. That is what we do. Or remember smoother pulleys are back side of the belt grooved the inside of the belt.
Going clockwise, Starting at the top it goes on the outside of the the PowerSteering Pulley, then the outside of the alternator, then inside the upper idler pulley, then the outside of the AC compressor, then the outside of the Crank Pulley, the the inside of the tensioner and then the outside of the water pump pulley on its way back to the power steering.
Tensioner bolt (the center of the pulley) rotates clockwise to release the belt.
Hope that helps.