What OBD reader to use for 94' Sidekick ?

[onestoptakeaway]

Originally Posted by jtgh

your mech is off by 1. heheehe

just pull the dome fues and leave main bat alone, no reason at all, to pull it.
need fuse map.?

http://www.kick-fix.com/fusepanel-left-knee1w.jpg

you have this?

OK so just pull the fuse mark as Tail Dome 15A will reset the ECU ?

[jtgh]

that is correct.

15amp, dome, white wire leaving fuse holder goes to A1 on 16v, and B9 on 8v ecu.
this is the memory power wire.

it keeps memory from losing , stored codes.

it is hot 100% of the time.

[onestoptakeaway]

Pulling the Tail Dome (15A) is really easy but it reset my radio and clock too ha....ha.

[jtgh]

oops , i lied to you.
radio fuse feeds, radio power.
dome feeds , all memory wires. here is print attached. sorry.
there is no other way. on this car.

the below solves this riddle. easy.


but pulling fuse is easier and safer than battery messing.

silly dwg fails to show dome feeding memory wire. (corrected it )
ah but it does on ECU page.

cute huh?