1996 Tracker Exhaust Manifold

[Bear95]

It has a fitting in the header for it . It is located just above where the header connects to the exhaust pipe. I have never had a code or problem.
Bear

[ranger88den]

Yes, it has a bung for the O2 sensor. It comes with the manifold gasket & donut. I had to cut the existing manifold to downpipe studs because they were so rusted. I didn't have new studs so I used all-thread and reinstalled the tension springs. Also, due to the head studs I couldn't reinstall the engine lift bracket (but save it for future). I have heard that Low range off road has a shorter turn around time than Calmini, but have no experience with them. Good luck

[Bear95]

Originally Posted by ranger88den

Yes, it has a bung for the O2 sensor. It comes with the manifold gasket & donut. I had to cut the existing manifold to downpipe studs because they were so rusted. I didn't have new studs so I used all-thread and reinstalled the tension springs. Also, due to the head studs I couldn't reinstall the engine lift bracket (but save it for future). I have heard that Low range off road has a shorter turn around time than Calmini, but have no experience with them. Good luck

Thanks Ranger, I did not know the correct term for the fitting. I purchased the complete exhaust system from Calimini but still used my stock Cat Converter because of the price of a new one. It took about a 10 days to arrive after I ordered it. I love the sound of the exhaust because it reminds me of the MGA that my grandfather used to have. It has a low rumble until you put your foot into it. It has a deep sound, not like the fart can mufflers that some people put on Hondas.
Bear

[ranger88den]

Bear, I ordered the whole exhaust system too but because, other than the exhaust manifold, mine was in good shape, I saved it for future. Glad to know it has a nice sound.