Escudo 1996 1.6 3door 4wd

[calski]

Hi People

Need alittle help.. I need a set of in take gaskets for the fuel injector how ever i had know idea of the product number is. I have to orders them from afar and i do have a car manuel but my japanese is very very poor.. Any help or web site i can go.. Would be very useful thx. Chris

[deardsy]

Not sure what you mean, do you need intake gaskets or do you need seals for your injectors?

Intake gaskets can be made from ordinary cheap gasket paper, nothing fancy. You can even just use silicon.

What is the actual problem that made you start the post? May help to solve your problem.

[jtgh]

Eastern Caribbean
island.

few parts.

I recommend rockauto.com

many usa companies ship world wide.

injectors or gaskets. just login and cruise.

id recommend an injector cleaning serv. co. but they wouldnt have that.
they stock Viton O-rings for all cars.

do not put plumbing 0-rings in your Escudo, or it will leak and it WILL catch fire.
it will.

get the proper OEM parts or Vitons .

cheers.
love to visit the island some day.

I have a place 10 degrees south and west. ( Asia beach)

PERU - SURFING BEACHES IN PERU - ADVENTURE SPORTS

so I know parts and how hard the can be to find in some locals.

Salud.

[calski]

Well i took my car in for a service and i need the Fuel injector cleaning which means i need new gaskets/seals so it can be cleaned then put back together. And i can't get them on the island but a friend of mine is back in the uk coming back next week so i'm trying to find out the product numbers so he can get the parts i need. How ever i have asked him to get an engine overhaul kit if he can which i hope should have all the part i need , Yes?

[jtgh]

here is my best answer.
there are 12 Escudos world wide but only 1 official one, in your area. ( my guess )
some people import them so , i can not know that.
my guess:
car type SQ416L-3 E94 ( Escudo)
VIN # JSAFTD02V0020001----------
if the above numbers match then: ( if not report your numbers)

you need suzuki pn: injector seals ( times 4 each number)
15716-65DT0
and
09320-08062
or ask dealer for an injector rail, full seal kit.

identification of the actual VIN number or BODY id number
is very important.

I do know from reading these posts that many island people even order there cars directly from japan, and in that case it is a completely different car.

I suggest that you make copies of every single sticker and number plate on the car. This information is crucial to the proper identificaiton of your car.

see next post showing all escudos made world wide.
i you can match up the numbers to this list from your car lables.
then we can help.

[jtgh]

4 of the 12 can be discounted by year.

the remainder are by SQ and E numbers.

my guess is E94 . But Im not looking at car.

you just need a seal kit for injector service.

[calski]

JTGH , I can say that it's an import from Japan Type E-TA01W . With regards to the other numbers where would i find them... Thanks for all your help..

[jtgh]

some where on the car must be a sticker.
under hood , look up not down.
fire wall and fenders inside engine compartment.
door jambs with doors open
last is inside glove box. (anywhere) some are in Japanese.

THE "E" is the export number. you can see there are 12 cars.

so i did this, I looked at very Escudo car world wide
each of the 12 cars. they all had the same part number for the
injector seals.
with out a VIN or an E number, parts look up is spotty. (poor)

[jtgh]

here is the rail.

the same part numbers as USA 99 vitara (came here 3 years later) I just looked, SQ416 .

see attached doc. for pn an photos.

[calski]

Thx very much jtgh...