´96 sidekick cranckshaft pulley

[mebarinas]

Hi, i am new here, I did a search and found nothing, I hope someone can help me.

I need an Cranckshaft pulley, but I didn´t find it anywhere, can someone tell me where I can find it.

Thanks in advance

mebarinas

[tracka96]

Got mine for a 96 tracker at the local Chev dealer, should be the same as sidekick. price wasn't bad, but I don't remember what it was. Tracka96

[jtgh]

suzuki is cheaper, is it 1.6Liter
tell me I give you Suzi PN.
1.6L
belt pulley 12610-61G00
cog drive pulley 12639-57b01

above nums no good on 1.8L

Suzi $107 belt pulley, you can search look and see price anytime. enjoy

https://www.trademotion.com/partloca...&siteid=214330


whybuyGM ? and pay more?

[jtgh]

the trick to using his site is click mechanical.
then find general area and pick any part
then click view illistration BINGO , full drawing then pick a part
it is not intutive but works pefectly

Why go GM when they have this below ???

https://www.trademotion.com/partloca...46&catalogid=1

by the way I found this site after seaching hundereds of leads.
I buy everything from these guys.
1-low price
2- web page and parts photos
3- he answers all email , FAST
4- and listen to this , if it isnt on the list they will STILL GET IT !!!! < look !



this is my opinion , it comes with out my making one dime from this source, Im trying to save you money.
I have no affiation to any Suzuki entity.

[tracka96]

Looked up my receipt from the Chev dealer, one year ago the pulley cost me 54.20. Tracka96

[tracka96]

The price I listed above included the sprocket, key, bolt and seal. 1.6 engine, 96 Tracker. The CR sprocket itself was 35.33, GM part number 91173455. Tracka96

[jtgh]

OUR PRICE: $21.95
at >>gmpartsdirect.com: Alternate GM Catalog

the acutual pully
Crnkshft pulley 91-98 $105.47 $62.52


now if i can only find a EPC list for Geo Trackers.

this on line source hides the PN. (as do most , we all know why!)
with the real list on can buy the 1000 of parts not listed here, tranny bits,etc.

there GM prices are fickle as , a water pump is $98 ($35 more)
so one needs both EPC's to save money. < bottom line.

My GM dealer closed, gone. so finding a friendly GM source is hard. out on boonies.
I notice the above source lacks most the emission parts and igniton parts.


as the say ,let your fingers do the walking (www cruz) .....