95 kick motor in sami wiring problem....

samilvr · 05-04-2009, 09:10 PM

1995 sidekick 16v motor, I did the harness.. everything works. except im getting cel 41 and the injectors wont fire @ the dizzy I have 12v on the blue and ground on the black and the white goes straight to the ecu... anyone have any ideas??? Thanks in advance...

samilvr · 05-08-2009, 08:12 PM

WOW 34 views and no help... no swap guru's out there??

squid · 05-09-2009, 10:23 PM

check engine code 41 means the ecm is not see a 12v signal on neg side of coil when ignighter is open. first check is to disconnect ecm , turn key on and check for 12v at connecter side terminal A8.
let know what you find and we can go on to the next checks.
squid

samilvr · 05-10-2009, 12:26 AM

Thanks... got it handled lastnight it was A8 the harness that I got off the kick did not have the noise reduction filter I got one @ Petroworks today.. Its running fine now.. Thanks for the info.... By the way has anyone successfully chipped or reflashed these ecus yet??