I Have Tech Info For All Suzuki Models 1983-2000!

Nschreiner · 03-22-2006, 05:57 PM

Rejoice! Took a chance and bought a repair cd from ebay. It's a Mitchell Shop guide. It was only $15 usd on ebay. If anyone wants specific info feel free to email me @ Collectorsauction@hotmail.com Put 'Suzuki' in the subject field. It's a whole new world of repair possibilities. Good fortune to all.

-Nik

alialsukar · 04-03-2006, 01:48 AM

Quote:

Originally posted by Nschreiner@Mar 23 2006, 02:57 AM
Rejoice! Took a chance and bought a repair cd from ebay. It's a Mitchell Shop guide. It was only $15 usd on ebay. If anyone wants specific info feel free to email me @ Collectorsauction@hotmail.com Put 'Suzuki' in the subject field. It's a whole new world of repair possibilities. Good fortune to all.
-Nik

Quoted post

alialsukar · 04-03-2006, 01:55 AM

dear sir.

could you please provide me with more information regarding this CD i am intersting in bying one, i drive a suzuki baleno 1997 1.6 L

best regards

ali alsukar

fred42no · 08-22-2006, 10:27 AM

I'm interested with the CD I have a 1998 suzuki esteem 1.6 glx wagon.

Brit101 · 04-25-2008, 05:31 PM

A bump for a kind offer.

Isuzuzuki · 05-25-2008, 08:49 AM

I bought one a while back and found it very limited, we had Mitchell in auto tech school and this CD is no where near the same amount of info.
My opinion >-> rip off. ><

jim_naisium · 05-26-2008, 12:33 AM

If you have the 1999 Esteem I have a website that I run with a lot of basic repair info on it: http://home.comcast.net/~lj_robins/99suzuki/

two.marek · 06-16-2008, 11:00 AM

Hi jim_naisium

I may need your help with troublesuting my engine.
Are you will be willing to help?

regards

jim_naisium · 06-17-2008, 10:18 AM

I'll try to help you, what kind of trouble is your engine having?

two.marek · 06-17-2008, 10:46 AM

Quote:

Originally Posted by jim_naisium

I'll try to help you, what kind of trouble is your engine having?

Hallo,

It is not starting.

I get this in as is conditions, and I do not know history.
So far I did tested:
Timing marks are correct.
Compresion - about 120 (it looks like valves are OK)
Fuel pressure looks OK,
The injectors are receiving signal.
Spark? yes I have spark, but I think spark is about 180 degree off.
Scaning tool is not showing any error codes.
???????
I do not like position of "pickup points" for camshaft positioning sensor, but I do not know correct one.

Best regards
Marek