dustwatts

Hi Dust. I have 235/75/15 M/T's and plan on doing the 1 inch coil spacer and flipping the strut mount. I just wanted to ask if you had any photos of your rig with the 1 inch spacer installed. Thanks!

xxx, thank you, i am going to try it... I have been having a cold rough idle issue(cold i mean outside temp has been average 0 degrees in am, and 15-20 in afternoon, after warm up idle is smooth, and performance seems good too.

ive never use this way , message before
1994 1.6 8v 4x4 mt soft top, also have a 91 8v 4x4 mtm 4x4 mt lsi model, was wondering if computers would interchange?

they are both 56B30s (30 means, MT)
56B means 8v

i think both yours are B30s.
994 1.6 8v 4x4 mt soft top, also have a 91 8v 4x4 mtm 4x4 mt lsi model, was wondering if computers would interchange?

great question.
see my dead ecu page.
see pdf list. its horsed up for the suz. codes
http://www.fixkick.com/ECU/EPC-ECU96...95/89-95NA.pdf

ok idaho 94 tracker but that year, came with 8v or 16v.
the 16v is completly diffr. and in 96 , again, radical changes. then all the other years.
the 94 16v can use 92 to 95 dizzy bodies, only, if im guessing applications correct.
in the USA. (and some Canada)

the 1.3 is a pure mech. dizzy
the 1.6L is pure mech. from 89/90
the 1.6L after 90 is ECU controlled.

i need the years, to answer that. on the 1.6 for sure.
there are 3 or more generations of dizzy
and outside USA there are like 5.
not knowing all this input makes answers, impossible.

No - nothing for 1.3