Aux Input instalation
Hi everyone, i just finished installing the aux cable in my swift. I had to remove the radio to do it. I just want to leave a little tutorial to do it.
I used 2 small 4-pin connectors (using pin connectors for computer motherboards) and soldering a 1.5Kohm resistor between trigger 1 and trigger 2 according to the diagram. (connection diagram.jpg). This connection works for the swift, there is another picture in the blog but that didn't worked for the swift.
For me it was difficult to connect the cable to the radio without taking the radio out of the dashboard. To remove the radio just remove two screws, one at each side of the radio. (picture1.jpg)
Then you just have to push really hard to take it out, it has four "staples", i'm not sure how to call them, one in each corner that makes really hard to remove the radio.
That's all you need to do, it works great, just push the CD button twice to select the AUX input.
|
