G'day Muller,
When you changed the bearings in the gearbox did you have a close inspection of the input shaft? I had a similar problem in a Nissan Patrol and it ended up being the input shaft. The hardness on the shaft had deteriorated where the bearing was mounted which allowed the shaft to move out of alignment, and therefore the gears, with the layshaft (the main shaft on which the gears are mounted) and made a horrible grinding sound even under gentle acceleration. At least the gearbox in a Suzi is a lot easier and lighter than one in a Patrol. Hope this helps.
__________________
1985 Holden Drover Soft Top
Dual Batteries 
Extractors & 2" Exhaust
Ported & Polished Head
2" Suspension Lift
75ltr Long Range Fuel Tank 
150w Spotties x 2 
4 Post Bullbar
|
