you didnt read it
its a crush shell bearing, they are MATCHED sets. and CAN NOT BE intermixed.
its not like a trailer axle with bearings set loose , they are under 175 lbs/ft torque at all times, the gap is set , by the CRUSH of the centers .
very high tech method here.
that is way ( and low grease volumn) the service point is 7.5k miles. see?
if you do the maintenance the wheels never fall off.
if you need the whole section in the fsm for races, let me know.
it is not just a simple old fashioned , tapered roller bearing,not at all.
cheers.
|
