ide-mirror adjuster switch malfunctioning both left and right,
both left and right mirrors have 2 motors inside.
but only 3 wires each.
to test a mirror.
apply ground to the white wire.
then touch 12vdc power to , (RH) brn/red, motor up/dw spins,now touch gray wire to 12v and L/R motor spins.
ok
for LH, white is still ground (minus)common wire.
but Up/dn is brown
and L/R is green.
if all these tests pass then the mirros are perfect.
then you have bad wiring, or the power mirror switch is bad ($$)
if all mirrors dead, ciga-radio fuse is bad.
not sure of other isssue
is it .?
door controls, but what? all dead or just some.?
doorwindows up/and down, door locks? , remote key locks
need more facts on fails.
|
