There are two diagnostic plugs. One accepts an OBD2 scanner and there is also another. That plug enables you to pull fault codes without a scanner, on a RHD Jimny I believe it is located behind the glovebox. You need to place a wire jumper (or paperclip) across two terminals and that will cause the Check Engine Light to flash the codes.
Try this site too:
www.jimny.se - a site made for Suzuki Jimny and it's owners only
__________________
Faster than the speed of dark.
Vitara 1.6, 3+3 lift, winch bumper, 33" tyres, 5:83s.
SJ413KJA pickup, 1.6 conversion.
|
